Simple, yet powerful
Two devices, one method. Both sit behind the trim of your Jaguar, both use connectors that are already there, and neither leaves a trace when removed.
Sound: an amplifier, not an adaptor
JagBT is an external, high quality, Bluetooth enabled digital amplifier combined with an audio grade switchbox. Being an external amp, it bypasses the speaker wires from your existing radio to itself and plays your music through them.
Push the toggle switch and you are on Bluetooth. Push it again and your original stereo is back, exactly as it was. Nothing about the factory system is removed or disabled.
Your steering wheel buttons keep working for track and volume, and the microphone in the box lets you take calls hands free.
Vision: a camera on the screen you already have
If your car has satellite navigation, it already has the screen. JagBT Vision feeds a reversing camera into it, so the picture appears when you select reverse and disappears when you do not.
It is plug and play in the same sense as the audio unit: no wire splicing, no soldering and no intrusive modification. The correct hole saw drill bit is supplied in the box.
A written installation guide and a video come with it.
What it is, how it goes in, how you use it
| JagBT 2.0 and 3.0 | JagBT Vision | |
|---|---|---|
| What it is | An external, high quality, Bluetooth enabled digital amplifier combined with an audio grade switchbox. | A camera interface that puts a reversing camera on the factory satellite navigation screen. |
| How it goes in | Remove the stereo, unplug the radio, plug it into JagBT and plug JagBT into the radio. About half an hour. | It plugs in line at the navigation DVD drive in the boot. No cutting or modification of the vehicle harness. |
| How you use it | Pair your phone once after installation. It reconnects on its own from then on. | Select reverse and the camera picture appears on the screen by itself. No coding and no extra control modules. |
What is inside JagBT 2.0
- Audio processor
- TDA7850, a MOSFET technology class AB audio power amplifier designed for high power car radio.
- Output power
- 4 x 50W into 4 ohms maximum. 4 x 30W into 4 ohms at 14.4V, 1kHz, 10%.
- Input
- AC6925b Bluetooth chip, compliant with Bluetooth V5.0 + BR + EDR + BLE specification.
- Connector
- SOT-082 connectors, the same ones Jaguar used in these cars.
- Fuse
- JagBT takes power from the CD player's power line, so it is already fused.
- Weight and dimensions
- 150 x 100 x 55mm, 470g.
- Supported cars
- X-Type, S-Type and XJ (X350). JagBT 2.0 for the standard audio package, JagBT 3.0 for the Alpine premium system.
What is inside JagBT Vision
- Power consumption
- 0.8A.
- Video signal
- NTSC.
- Screen
- The factory satellite navigation display. No second screen and no mirror monitor.
- Connection
- In line with the white connector at the back of the navigation DVD drive in the boot. No cutting of the vehicle harness.
- Camera connections
- RCA video and a jack connector, both from the camera to the JagBT Vision module.
- Switching
- Reverse activated power and trigger, so the picture shows whenever reverse is selected.
- Supported cars
- X-Type, S-Type and XJ (X350) with factory satellite navigation.
- Supplied with
- Camera, the correct hole saw drill bit, a written installation guide and a video.